DIN 934 — Hex Nut
Data sheet · Revision 04 · 2026-09-16
Dimension table
| d1 | s (mm) | e (mm) | m (mm) |
|---|---|---|---|
| M1 | 2.5 | 2.72 | 0.8 |
| M1.2 | 3 | 3.29 | 1 |
| M1.4 | 3 | 3.29 | 1.2 |
| M1.6 | 3.2 | 3.48 | 1.3 |
| M1.7 | 3.5 | 3.82 | 1.4 |
| M2 | 4 | 4.32 | 1.6 |
| M2.3 | 4.5 | 4.95 | 1.8 |
| M2.5 | 5 | 5.45 | 2 |
| M2.6 | 5 | 5.51 | 2 |
| M3 | 5.5 | 6.01 | 2.4 |
| M4 | 7 | 7.66 | 3.2 |
| M5 | 8 | 8.76 | 4 |
| M6 | 10 | 11.05 | 5 |
| M7 | 11 | 12.12 | 5.5 |
| M8 | 13 | 14.38 | 6.5 |
| M10 | 17 | 18.9 | 8 |
| M12 | 19 | 21.1 | 10 |
| M14 | 22 | 24.49 | 11 |
| M16 | 24 | 26.75 | 13 |
| M18 | 27 | 29.56 | 15 |
| M20 | 30 | 32.95 | 16 |
| M22 | 32 | 35.03 | 18 |
| M24 | 36 | 39.55 | 19 |
| M27 | 41 | 45.2 | 22 |
| M30 | 46 | 50.85 | 24 |
| M33 | 50 | 55.37 | 26 |
| M36 | 55 | 60.79 | 29 |
| M39 | 60 | 66.44 | 31 |
| M42 | 65 | 71.3 | 34 |
| M45 | 70 | 76.95 | 36 |
| M48 | 75 | 82.6 | 38 |
| M52 | 80 | 88.25 | 42 |
| M56 | 85 | 95.07 | 45 |
| M60 | 90 | 100.72 | 48 |
| M64 | 95 | 106.37 | 51 |
| M68 | 100 | 112.02 | 54 |
| M72 | 105 | 117.67 | 58 |
d1: Nominal thread size
s: Width across flats
e: Width across corners
m: Nut height
Drawing d corresponds to table d1; s — width across flats; e — width across corners; m — nut height.
הכותרות במקור אינן מציינות max./min./nom./ref.; אין להניח סבולות שלא נמסרו.
Column headings do not specify max./min./nom./ref. Tolerances are not inferred.
Notes
All dimensions in millimeters. Property class, finish and torque are not specified on this sheet. No stock availability or current-standard equivalence is inferred.
M3.5 is withheld pending verification of e=6.01 (identical to M3 while s changes). No replacement value is inferred.